Toyota Celica 2005 Repair Manual page 2320

BO−14
Lower Plate
Snap
Snap
2005 CELICA (RM1131U)
BODY
12.
Remove the 2 bolts and 2 upper window stops.
H06186
13.
(a)
(b)
(c)
NOTICE:
Be careful not to drop the door glass.
HINT:
H06188
S
S
14.
(a)
(b)
Setting
Nut
(c)
(d)
(e)
Lower Plate
H12233
(f)
− FRONT DOOR
REMOVE UPPER WINDOW STOPS
Torque: 11 N·m (115 kgf·cm, 8 ft·lbf)
REMOVE DOOR GLASS
Close the door glass until the nuts appear in the service
hole.
Remove the 3 nuts.
Torque: 7.8 N·m (80 kgf·cm, 69 in.·lbf)
Take the door glass out of the panel carefully.
At the time of reassembly, please refer to the following
item.
Insert a shop rag inside the panel to prevent the glass
from being scratched.
REMOVE WINDOW REGULATOR
Remove the bolt of lower plate.
Torque: 4.9 N·m (50 kgf·cm, 43 in.·lbf)
Unlock the snap by pulling the lower plate.
Remove the snap and lower plate from the stud bolt of
lower bracket.
Remove the setting nut.
w/ Power window:
Disconnect the connector.
Remove the 5 nuts and window regulator.
Torque: 8.3 N·m (85 kgf·cm, 74 in.·lbf)
2319