Toyota Celica 2005 Repair Manual page 1495

Upper Side Rail
Front
No.2 Compression
2005 CELICA (RM1131U)
ENGINE MECHANICAL
2.
Code Mark
(a)
(b)
No.2
A01442
(c)
No.1
Compression
NOTICE:
Do not align the ring ends.
Lower Side Rail
A01176
3.
(a)
(b)
A01188
4.
HINT:
Upper bearings have an oil groove and oil holes; Lower bear-
ings do not.
(a)
NOTICE:
Install the bearing with the oil hole in the cylinder block.
A01190
(b)
A01189
− CYLINDER BLOCK
INSTALL PISTON RINGS
Install the oil ring expander and 2 side rails by hand.
Using a piston ring expander, install the 2 compression
rings with the code mark facing upward.
Code mark :
1ZZ−FE: T or 2R
2ZZ−GE: T
Position the piston rings so that the ring ends are as
shown.
INSTALL CONNECTING ROD BEARINGS
Align the bearing claw with the groove of the connecting
rod or connecting cap.
Install the bearings in the connecting rod and connecting
rod cap.
INSTALL MAIN BEARINGS
Align the bearing claw with the claw groove of the cylinder
block, and push in the 5 upper bearings.
Align the bearing claw with the claw grove of the main
bearing cap, and push in the 5 lower bearings.
1494
EM−109