Toyota Celica 2005 Repair Manual page 1700

2005 CELICA (RM1131U)
CHARGING − GENERATOR
INSTALLATION
1. INSTALL GENERATOR
(a) Install the 2 bolts and generator.
Torque:
14 mm head 25 N·m (250 kgf·cm, 18 ft·lbf)
17 mm head
1ZZ−FE: 54 N·m (550 kgf·cm, 40 ft·lbf)
2ZZ−GE: 58 N·m (590 kgf·cm, 43 ft·lbf)
(b) 2ZZ−GE:
B07731
Install the generator bracket with the 2 bolts.
Torque: 29 N·m (295 kgf·cm, 21ft·lbf)
(c) Connect the generator connector.
(d) Connect the generator wire, and install the nut and rubber
cap.
(e) Connect the generator wire, and install the rubber cap
and nut.
2. INSTALL DRIVE BELT
1699
CH−17
CH028−07