Toyota Celica 2005 Repair Manual page 1407

SST
2005 CELICA (RM1131U)
ENGINE MECHANICAL
A21007
2ZZ−GE:
A10388
A07317
A10389
− TIMING CHAIN
12. REMOVE CRANKSHAFT PULLEY
(a) Using SST, remove the pulley bolt.
SST 09960−10010 (09962−01000, 09963−01000)
(b) Remove the crankshaft pulley from the crankshaft.
13. DISCONNECT
FROM TIMING CHAIN COVER
Remove the 2 bolts and crankshaft position sensor.
14. REMOVE DRIVE BELT TENSIONER
Remove the bolt, nut and drive belt tensioner.
15. REMOVE RH ENGINE MOUNTING BRACKET
(a) 1ZZ−FE:
Remove the 3 bolts and mounting bracket.
(b) 2ZZ−GE:
Remove the 4 bolts and mounting bracket.
16. 2ZZ−GE:
REMOVE FRONT EXHAUST PIPE (See page EM−44)
17. 2ZZ−GE:
REMOVE EXHAUST MANIFOLD STAY
(See page EM−44)
18. 2ZZ−FE:
REMOVE EXHAUST MANIFOLD (See page EM−44)
19. REMOVE CHAIN TENSIONER
Remove the 2 nuts and chain tensioner.
20. REMOVE WATER PUMP (See page CO−5)
21. 1ZZ−FE:
REMOVE TIMING CHAIN COVER
(a) Remove the 11 bolts and nut.
(b) Using a torx® wrench socket (E8), remove the stud bolt.
(c) Remove the timing chain cover by prying the portions be-
tween the cylinder head and cylinder block with a screw-
driver.
NOTICE:
Be careful not to damage the contact surfaces of the timing
chain cover, cylinder head and cylinder block.
1406
CRANKSHAFT POSITION SENSOR
EM−21