Toyota Celica 2005 Repair Manual page 1845

AX−12
C
A
C
B
B
C
2005 CELICA (RM1131U)
AUTOMATIC TRANSAXLE (U240E)
15.
D02936
16.
A
(a)
(b)
B
(c)
C
B
D02935
(d)
17.
18.
Install the ATF temperature sensor with the lock plate and bolt.
19.
D02934
20.
(a)
(b)
D05880
− VALVE BODY ASSEMBLY
INSTALL CHECK VALVE AND SPRING
INSTALL VALVE BODY
Align the groove of the manual valve with the pin of the
manual valve lever.
Temporarily install the valve body with the 17 bolts.
Bolt length:
Bolt A: 25 mm (0.98 in.)
Bolt B: 41 mm (1.61 in.)
Bolt C: 45 mm (1.77 in.)
Check that the manual valve lever contacts the center of
the roller at the tip of the detent spring.
Tighten the 17 bolts.
Torque: 11 N·m (110 kgf·cm, 8 ft·lbf)
CLAMP WIRE HARNESS TO 2 CLAMPS
INSTALL ATF TEMPERATURE SENSOR
Torque: 6.6 N·m (67 kgf·cm, 58 in.·lbf)
CONNECT 5 SHIFT SOLENOID VALVE CONNECTORS
INSTALL OIL STRAINER
Coat a new O−ring with ATF.
Install the O−ring to the oil strainer.
1844