Toyota Celica 2005 Repair Manual page 1681

Terminal 50
Battery
Battery
Disconnect
Battery
Terminal 30
Ammeter
Battery
2005 CELICA (RM1131U)
STARTING
TEST
NOTICE:
These tests must be performed within 3 to 5 seconds to
avoid burning out the coil.
1. DO PULL−IN TEST
Terminal C
(a) Disconnect the field coil lead wire from terminal C.
(b) Connect the battery to the magnetic switch as shown.
Check that the clutch pinion gear moves outward.
B00403
2. DO HOLD−IN TEST
With battery connected as above with the clutch pinion gear
out, disconnect the negative (−) lead from terminal C. Check
Disconnect
that the clutch pinion gear remains out.
B00402
3. INSPECT CLUTCH PINION GEAR RETURN
Disconnect the negative (−) lead from the switch body. Check
that the clutch pinion gear returns inward.
B00226
4. DO NO−LOAD PERFORMANCE TEST
(a) Connect the battery and ammeter to the starter as shown.
Terminal 50
(b) Check that the starter rotates smoothly and steadily with
the pinion gear moving out. Check that the ammeter
shows the specified current.
Specified current: 90 A or less at 11.5 V
B00225
1680
− STARTER
ST−15
ST02S−13