Toyota Celica 2005 Repair Manual page 2128

SUPPLEMENTAL RESTRAINT SYSTEM
2005 CELICA (RM1131U)
− FRONT PASSENGER AIRBAG ASSEMBLY
REMOVAL
NOTICE:
If the wiring connector of the SRS is disconnected
S
and the ignition switch is in ON position, DTCs will be
recorded.
Never use the airbag parts from another vehicle.
S
When replacing parts, replace them with new parts.
1. DISCONNECT AIRBAG CONNECTOR
(a) Remove the 3 screws, 2 bolts and lower finish panel.
(b) Remove the connector cover from the lower finish panel.
NOTICE:
When handling the airbag connector, take care not to dam-
age the airbag wire harness.
(c) Disconnect the airbag connector.
H12009
2. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY
Remove the bolt and 2 nuts.
CAUTION:
Do not store the front passenger airbag assembly
S
with the airbag deployment side facing downward.
Never disassemble the front passenger airbag as-
S
sembly.
NOTICE:
When removing the front passenger airbag assembly, take
care not to damage the wire harness.
H11958
2127
RS−27
RS0JX−04