Toyota Celica 2005 Repair Manual page 1492

Hide thumbs Also See for Celica 2005:

Table of Contents

2005 CELICA (RM1131U)

ENGINE MECHANICAL

REPLACE CONNECTING ROD BUSHINGS

Using SST and a press, press out the bushing.

Align the oil hoses of a new bushing and the connecting

Using SST and a press, press in the bushing.

Using a pin hole grinder, hone the bushing to obtain the

standard specified clearance (See page EM−100) be-

tween the bushing and piston pin.

Check the piston pin fit at normal room temperature. Coat

the piston pin with engine oil, and push it into the connect-

ing rod with your thumb.

REPLACE CRANKSHAFT REAR OIL SEAL

If rear oil seal is installed to cylinder block.

Cut Position

Using a knife cut off the oil seal lip.

Using a screwdriver, pry out the oil seal.

Be careful not to damage the crankshaft. Tape the screw-

CYLINDER BLOCK

Show Quick Links

Table of Contents