Toyota Celica 2005 Repair Manual page 2239

BE−64
2005 CELICA (RM1131U)
BODY ELECTRICAL
6.
(a)
(b)
(c)
2
1
I11649
(d)
(e)
(f)
If operation is not as specified, replace the motor.
1 2
I11602
− POWER WINDOW CONTROL SYSTEM
Passenger 's door:
INSPECT PTC OPERATION
Disconnect the connector from the power window switch.
Connect the ammeter positive (+) lead to terminal 1 of the
wire harness side connector and the ammeter negative
(−) lead to negative terminal of the battery.
Connect the positive (+) lead from the battery to terminal
2 of the wire harness side connector, and raise the win-
dow to the fully closed position.
Continue to apply voltage, and check that the current
changes from approximately 14 A to less than 1 A within
4 to 90 seconds.
Disconnect the leads from terminals.
Approximately 90 seconds later, connect the battery posi-
tive (+) lead to terminal 1 and the battery negative (−) lead
to terminal 2, then check that the window begins to de-
scend.
2238