EM−22
2005 CELICA (RM1131U)
ENGINE MECHANICAL
−
22.
2ZZ−GE:
REMOVE TIMING CHAIN COVER
(a)
Remove the 13 bolts.
(b)
Using a torx® wrench socket (E8), remove the stud bolt.
(c)
Remove the timing chain cover and 2 gaskets.
23.
REMOVE CRANK ANGLE SENSOR PLATE
24.
REMOVE CHAIN TENSIONER SLIPPER
Remove the bolt and slipper.
A23610
25.
REMOVE TIMING CHAIN AND CRANKSHAFT TIMING
SPROCKET
If the crankshaft timing sprocket cannot be removed by hand,
use 2 screwdrivers.
NOTICE:
Position shop rags as shown to prevent damage.
26.
REMOVE CHAIN VIBRATION DAMPER
Remove the 2 bolts and damper.
B00302
27.
REMOVE VALVE TIMING CONTROL ASSEMBLY AND
CAMSHAFT TIMING SPROCKET
Hold the hexagonal head wrench portion of the camshaft with
a wrench, and remove the bolt, valve timing controller assembly
and timing sprocket.
NOTICE:
Be careful not to damage the cylinder head and valve
S
lifter with the wrench.
Do not disassemble the valve timing controller as-
S
A10371
sembly.
1407
TIMING CHAIN