Toyota Celica 2005 Repair Manual page 2084

SR−38
SST
2005 CELICA (RM1131U)
STEERING − POWER STEERING GEAR
REMOVAL
NOTICE:
Remove the steering wheel assembly before the steering
gear removal, because there is possibility of breaking of
the spiral cable.
1. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
2. REMOVE STEERING WHEEL PAD (See page SR−13)
3. REMOVE STEERING WHEEL (See page SR−13)
4. REMOVE RH, CENTER AND LH ENGINE UNDER COV-
ERS
5. DISCONNECT RH AND LH TIE ROD ENDS
(See page SA−13)
6. DISCONNECT NO. 2 INTERMEDIATE SHAFT AS-
SEMBLY (See page SR−13)
7. DISCONNECT PRESSURE FEED AND RETURN
TUBES
Using SST, disconnect the pressure feed and return tubes.
SST 09023−38401
F13580
8. DISCONNECT TUBE CLAMP
Remove the bolt and disconnect the tube clamp.
9. DISCONNECT COLUMN HOLE COVER SUB−AS-
SEMBLY
10. REMOVE ENGINE HOOD (See page BO−9)
F08863
2083
SR0YR−04