Toyota Celica 2005 Repair Manual page 1500

EM−114
*
Nut
*
Adhesive
2005 CELICA (RM1131U)
ENGINE MECHANICAL
HINT:
Avoid applying an excessive amount to the surface.
(c)
(d)
19.
*: 2ZZ−GE
A12101
20.
21.
22.
(a)
(b)
P12477
HINT:
After applying the specified torque, rotate the drain union clock-
wise until its drain port is facing downward.
23.
− CYLINDER BLOCK
Parts must be assembled within 3 minutes of ap-
S
plication. Otherwise the material must be removed
and reapplied.
Immediately remove nozzle from the tube and rein-
S
stall cap.
1ZZ−FE:
Install the oil pan with the 14 bolts and 2 nuts. Uniformly
tighten the bolts and nuts in several passes.
2ZZ−GE:
Install the oil pan with the 12 bolts and 4 nuts. Uniformly
tighten the bolts and nuts in several passes.
Torque: 9.0 N·m (92 kgf·cm, 80 in.·lbf)
INSTALL OIL FILTER UNION
Torque: 30 N·m (306 kgf·cm, 21 ft·lbf)
INSTALL OIL FILTER (See page LU−3)
INSTALL OIL PUMP (See page LU−14)
INSTALL ENGINE COOLANT DRAIN UNION
Apply adhesive to 2 or 3 threads.
Adhesive:
Part No. 08833−00080, THREE BOND 1344,
LOCTITE 242 or equivalent
Install the drain union.
Torque:
1ZZ−FE 20 N·m (200 kgf·cm, 14 ft·lbf)
2ZZ−GE 25 N·m (255 kgf·cm, 18 ft·lbf)
INSTALL KNOCK SENSOR
Torque:
1ZZ−FE 44 N·m (450 kgf·cm, 33 ft·lbf)
2ZZ−GE 20 N·m (204 kgf·cm, 15 ft·lbf)
1499