Toyota Celica 2005 Repair Manual page 1518

(a)
(c)
(c)
2005 CELICA (RM1131U)
EMISSION CONTROL
REMOVAL
1. REMOVE UPPER FRONT FENDER APRON SEAL
2. REMOVE UPPER RADIATOR SUPPORT SEAL
3. REMOVE AIR SWITCHING VALVE
(a) Disconnect the pressure sensor connector.
(b) Using a plier, grip the claws of the hose clips and slide the
clips along the hoses.
(c) Disconnect the 2 air hoses.
(d)
(d) Disconnect the vacuum hoses.
B17066
(e) Remove the 2 bolts and air switching valve.
Torque: 20.5 N·m (209 kgf·cm, 15 ft·lbf)
B17067
(f) Remove the 2 bolts and bracket.
Torque: 8.0 N·m (82 kgf·cm, 71 in.·lbf)
(g) Remove the 2 bushes.
B13845
4. REMOVE PRESSURE SENSOR
(a) Remove the vacuum hose.
(b) Remove the 2 bolts and pressure sensor.
Torque: 5.0 N·m (55 kgf·cm, 48 in.·lbf)
B17072
− SECONDARY AIR INJECTION SYSTEM (2ZZ−GE)
1517
EC−15
EC0NC−01