Toyota Celica 2005 Repair Manual page 1533

SF−12
2005 CELICA (RM1131U)
SFI − FUEL PUMP
DISASSEMBLY
1. REMOVE NO. 2 FUEL SUCTION SUPPORT
(a) Using a small screwdriver, remove the No. 2 fuel suction
support.
(b) Remove the rubber cushion.
B07750
2. REMOVE NO. 1 FUEL SUCTION SUPPORT
(a) Disconnect the fuel sender gauge connector and earth
plate.
(b) While pressing the lock of the fuel pump filter, slide the
fuel sender gauge and remove it.
B11526
(c) Using a small screwdriver, remove the No. 1 fuel suction
support.
NOTICE:
Do not damage the fuel suction support and fuel suction
plate.
(d) Disconnect the fuel pump harness from the No. 1 fuel suc-
tion support and fuel pump.
3. REMOVE VAPOR PRESSURE SENSOR
Pull off the joint clip and remove the vapor pressure sensor from
B07751
No. 1 fuel suction support.
4. REMOVE FUEL PUMP
Remove the pump from the fuel filter.
5. REMOVE FUEL PRESSURE REGULATOR
Pull out the fuel pressure regulator and O−ring from the fuel fil-
ter.
B07752
6. REMOVE FUEL SUCTION FILTER
(a) Using a small screwdriver, pry out the clip.
(b) Pull out the suction filter.
B10720
1532
SF13P−09