Toyota Celica 2005 Repair Manual page 2067

Horn Switch Terminal
1
2
Secondary Locking Device
2005 CELICA (RM1131U)
STEERING
INSTALLATION
1.
1 2 3 4 5 6
(a)
(b)
(c)
(d)
F10506
2.
(a)
(b)
(c)
(d)
3.
(a)
(b)
(c)
(d)
(e)
4.
(a)
(b)
5.
(a)
Matchmarks
F08846
(b)
− TILT STEERING COLUMN
w/ Transmission shift switch:
INSTALL TRANSMISSION SHIFT SWITCH ASSEMBLY
TO STEERING WHEEL
Install the transmission shift switch assembly.
Push the terminal 1 (horn switch terminal) into the con-
nector.
Engage the secondary locking device of the connector.
Install the 2 screws.
w/ Speed control main switch:
INSTALL SPEED CONTROL MAIN SWITCH AS-
SEMBLY TO STEERING WHEEL
Install the speed control main switch assembly.
Push the terminal 1 (horn switch terminal) into the con-
nector.
Engage the secondary locking device of the connector.
Install the 2 screws.
w/ Transmission shift switch and speed control main
switch:
INSTALL TRANSMISSION SHIFT SWITCH ASSEMBLY
AND SPEED CONTROL MAIN SWITCH ASSEMBLY TO
STEERING WHEEL
Install the transmission shift switch assembly and speed
control main switch assembly.
Push the terminal 1 (horn switch terminal) into the con-
nector.
Engage the secondary locking device of the connector.
Install the 2 screws to the transmission shift switch as-
sembly.
Install the 2 screws to the speed control main switch as-
sembly.
INSTALL NO. 2 INTERMEDIATE SHAFT ASSEMBLY
Align the matchmarks on the No. 2 intermediate shaft as-
sembly and main shaft assembly.
Install the No. 2 intermediate shaft assembly with the bolt.
Torque: 35 N·m (360 kgf·cm, 26 ft·lbf)
INSTALL STEERING COLUMN ASSEMBLY
Install the steering column assembly with the 2 bolts and
nuts.
Torque: 21 N·m (210 kgf·cm, 15 ft·lbf)
Connect the connectors.
2066
SR−21
SR0YN−08