Toyota Celica 2005 Repair Manual page 1964

2005 CELICA (RM1131U)
SUSPENSION AND AXLE
8. DISCONNECT UPPER SUPPORT SUSPENSION ARM
Remove the bolt and nut, and disconnect the upper suspension
arm.
Torque: 74 N·m (755 kgf·cm, 55 ft·lbf)
NOTICE:
Do not turn the nut.
HINT:
At the time of installation, after stabilizing the suspension,
torque the bolt.
9. REMOVE REAR AXLE CARRIER
(a) Remove the front side bolt and nut of the lower suspen-
sion arm.
Torque: 74 N·m (755 kgf·cm, 55 ft·lbf)
HINT:
At the time of installation, after stabilizing the suspension,
torque the nut.
Matchmarks
(b) Place matchmarks on both the cam plate and lower sus-
pension arm.
F08628
(c) Remove the nut, cam plate and cam bolt.
Torque: 74 N·m (755 kgf·cm, 55 ft·lbf)
HINT:
At the time of installation, after stabilizing the suspension,
torque the nut.
(d) Remove the rear axle carrier.
− REAR AXLE CARRIER
1963
SA−57