Toyota Celica 2005 Repair Manual page 1421

Seal
Packing
2005 CELICA (RM1131U)
ENGINE MECHANICAL −
20. 1ZZ−FE:
INSTALL CYLINDER HEAD COVER
(a) Remove any old packing (FIPG) material.
(b) Apply seal packing to 2 locations as shown in the illustra-
tion.
Seal packing:
Part No. 08826 − 00080 or equivalent
(c) Install the gasket to the cylinder head cover.
HINT:
B00301
Part must be assembled within 3 minutes of application.
Otherwise the material must be remove and reapplied.
(d) Install the cylinder head cover with the 9 bolts, 2 seal
washers and 2 nuts.
Uniformly tighten the bolts and nuts, in the several
passes, in the sequence shown.
Torque:
w/o washer
11 N·m (113 kgf·cm, 8 ft·lbf)
w/ washer
9.0 N·m (92 kgf·cm, 80 in.·lbf)
A21001
(e) Connect the 2 PCV hoses to the cylinder head cover.
(f) Install the ignition coil (See page IG−7).
21. 2ZZ−GE:
INSTALL CYLINDER HEAD COVER
(a) Remove any old packing (FIPG) material.
HINT:
When FIPG on the head cover gasket side cannot be elimi-
nated completely, replace the gasket.
(b) Apply seal packing to 2 locations as shown in the illustra-
tion.
Seal packing:
B00301
Part No. 08826−00080 or equivalent
1420
TIMING CHAIN
EM−35