Toyota Celica 2005 Repair Manual page 1997

w/o ABS:
SST
w/ ABS:
SST
2005 CELICA (RM1131U)
BRAKE − BRAKE MASTER CYLINDER
REMOVAL
1. REMOVE BATTERY
2. DISCONNECT LEVEL WARNING SWITCH CONNEC-
TOR
3. DRAW OUT FLUID WITH SYRINGE
NOTICE:
Do not let brake fluid remain on a painted surface. Wash it
off immediately.
4. M/T:
DISCONNECT RESERVOIR HOSE
F09527
5. DISCONNECT BRAKE LINE
(a) w/o ABS:
Using SST, disconnect the 5 brake lines from the master
cylinder and 3−way union.
SST 09023−00101
Torque: 15 N·m (155 kgf·cm, 11 ft·lbf)
(b) w/ ABS:
Using SST, disconnect the 2 brake lines from the master
cylinder.
SST 09023−00101
Torque: 15 N·m (155 kgf·cm, 11 ft·lbf)
F09528
6. REMOVE MASTER CYLINDER
(a) Remove the 2 mounding nuts.
Torque: 13 N·m (130 kgf·cm, 9 ft·lbf)
(b) w/o ABS:
Pull out the check valve bracket, 3−way and master cylin-
der.
(c) w/ ABS:
Pull out the check valve bracket and master cylinder.
(d) Remove the gasket from the master cylinder.
F09529
1996
BR−11
BR0Q2−03