Toyota Celica 2005 Repair Manual page 2159

RS−58
SUPPLEMENTAL RESTRAINT SYSTEM
2005 CELICA (RM1131U)
− FRONT AIRBAG SENSOR
REMOVAL
NOTICE:
If the wiring connector of the SRS is disconnected
S
with the ignition switch at ON position, DTCs will be
recorded.
Never use SRS parts from another vehicle. When re-
S
placing parts, replace them with new parts.
Never reuse the sensor involved in a collision when
S
the SRS has deployed.
Never repair a sensor in order to reuse it.
S
1. LH:
REMOVE FRONT AIRBAG SENSOR
(a) Remove the air cleaner hose.
(b) Remove the air cleaner cap.
(c) Remove the air filter.
(d) Remove the 2 bolts and air cleaner case.
(e) Disconnect the connector.
NOTICE:
Disconnect the connector with sensor assembly installed.
H11988
(f) Remove the 2 bolts and front airbag sensor LH.
2. RH:
REMOVE FRONT AIRBAG SENSOR
(a) Remove the 5 clips and upper front fender apron seal.
(b) Disconnect the connector.
NOTICE:
Disconnect the connector with sensor assembly installed.
(c) Remove the 2 bolts and front airbag sensor RH.
H11989
2158
RS0KE−06