2005 CELICA (RM1131U)
STARTING
−
REASSEMBLY
HINT:
Use high−temperature grease to lubricate the bearings and
gears when assembling the starter.
1.
INSTALL ARMATURE TO MAGNETIC SWITCH AS-
SEMBLY
(a)
2ZZ−GE:
Ring
Rotating the ring of the front bearing, set it properly so that
the projection of the ring is positioned in the narrowest
B09595
part.
(b)
Apply grease to the armature bearings.
(c)
1ZZ−FE:
Install the armature to the magnetic switch assembly.
(d)
2ZZ−GE:
Using a press, install the armature to the magnetic switch
assembly.
B09596
2.
INSERT STEEL BALL INTO CLUTCH SHAFT HOLE
(a)
Apply grease to the steel ball.
(b)
Insert the steel ball into the clutch shaft hole.
B02351
3.
INSTALL STARTER HOUSING, CLUTCH ASSEMBLY
AND GEARS
(a)
Apply grease to the return spring.
(b)
Insert the return spring into the magnetic switch hole.
B02300
1678
STARTER
ST−13
ST0HQ−02