Toyota Celica 2005 Repair Manual page 2046

SST
2005 CELICA (RM1131U)
BRAKE − REAR SPEED SENSOR
INSTALLATION
1. INSTALL NEW SPEED SENSOR
(a) Clean the contacting surface of the axle hub and a new
speed sensor.
NOTICE:
Do not stick any foreign objects to the sensor rotor.
(b) Place the speed sensor on the axle hub so that the con-
nector makes the most downward position under the on−
vehicle condition.
F07318
(c) Using SST and a press, install a new speed sensor to the
axle hub.
SST 09214−76011
NOTICE:
Do not tap the speed sensor with a hammer directly.
S
Check that there should be no foreign objects on the
S
speed sensor detection portion.
Press in the speed sensor straight and slowly.
S
2. INSTALL SPEED SENSOR WITH REAR AXLE
F08658
(See page SA−60)
3. CONNECT SPEED SENSOR CONNECTOR
4. INSTALL REAR WHEEL
Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)
5. CHECK SPEED SENSOR SIGNAL (See page DI−836)
2045
BR−59
BR14J−04