Toyota Celica 2005 Repair Manual page 2258

Within
40 secs.
Press the lock and unlock switches on the transmitter switch simultaneously for
less than 1.5 sec.
Within
3 secs.
Press either one of 2 switches on the transmitter.
Door control relay automatically performs LOCK−UNLOCK operation once or
twice at a 1 sec. interval to inform the operator that the receiver has received the
signal from the transmitter.
LOCK−UNLOCK occurs once
Within
3 secs.
Registration of recognition code is completed
LOCK−UNLOCK occurs twice
Registration of recognition code has not been completed.
D Recognition code received first time and second time did not match.
D When selecting add mode, an already registered recognition code was received.
If LOCK−UNLOCK operation cannot be performed at all, the mode returns to the
normal mode, then start with "Start registration of recognition code".
If even one of the following conditions is satisfied, registration of recognition
codes is completed.
Registration of recognition codes (add mode or rewrite mode) is completed.
2005 CELICA (RM1131U)
BODY ELECTRICAL
When prohibition
mode is selected.
Door control relay performs LOCK−UNLOCK operation 5 times at a 1 sec.
interval to inform the operator that prohibition mode has been selected.
ON
LOCK
Proceed to finish registration
D 40 secs. elapses since the door control relay response.
D The driver's door is opened.
D The key plate is inserted in the ignition key cylinder.
D 4 type recognition codes are registration at one time.
− WIRELESS DOOR LOCK CONTROL SYSTEM
Approx. Approx.
1 sec. 1 sec.
2257
Proceed to continue registration
Within 40 secs.
BE−83