Toyota Celica 2005 Repair Manual page 1981

SA−74
2005 CELICA (RM1131U)
SUSPENSION AND AXLE
(c) Remove the nut, cam plate and cam bolt.
Torque: 74 N·m (755 kgf·cm, 55 ft·lbf)
HINT:
At the time of installation, after stabilizing the suspension,
torque the nut.
(d) Disconnect the rear axle carrier from the lower suspen-
sion arm.
7. DISCONNECT REAR SHOCK ABSORBER
Remove the bolt and nut and disconnect the rear shock absorb-
er.
Torque: 140 N·m (1,428 kgf·cm, 103 ft·lbf)
NOTICE:
Do not turn the nut.
HINT:
At the time of installation, after stabilizing the suspension,
torque the bolt.
8. REMOVE LOWER SUSPENSION ARM
(a) Remove the bolt and nut on the rear side of lower suspen-
sion arm.
Torque: 74 N·m (755 kgf·cm, 55 ft·lbf)
HINT:
At the time of installation, after stabilizing the suspension,
torque the nut.
(b) Remove the front side 3 bolts and lower suspension arm.
9. REMOVE SUSPENSION ARM BRACKET
Remove the nut, suspension arm bracket and stopper.
Torque: 110 N·m (1,122 kgf·cm, 81 ft·lbf)
HINT:
At the time of installation, after stabilizing the suspension,
torque the nut.
F08629
1980
− REAR LOWER SUSPENSION ARM