Toyota Celica 2005 Repair Manual page 2041

BR−54
2005 CELICA (RM1131U)
BRAKE − FRONT SPEED SENSOR
REMOVAL
1. DISCONNECT SPEED SENSOR CONNECTOR
(a) Remove the front wheel.
Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)
(b) Remove the fender liner.
(c) Disconnect the speed sensor connector and resin clip.
F09770
2. REMOVE SPEED SENSOR
(a) Remove the 2 clamp bolts holding the sensor harness
from the body and shock absorber.
Torque: 8.0 N·m (82 kgf·cm, 71 in.·lbf)
F09697
(b) Remove the speed sensor installation bolt from the steer-
ing knuckle.
Torque: 8.0 N·m (82 kgf·cm, 71 in.·lbf)
NOTICE:
At the time of installation, please refer to the following item.
There are no foreign objects on the sensor or the part
S
of the knuckle to which the sensor is to be installed.
The sensor is installed flat against the knuckle when
S
you tighten the bolt.
F09698
2040
BR0R1−05