Toyota Celica 2005 Repair Manual page 2169

RS−68
SUPPLEMENTAL RESTRAINT SYSTEM
2005 CELICA (RM1131U)
− DOOR SIDE AIRBAG SENSOR
REMOVAL
NOTICE:
If the wiring connector of the SRS is disconnected
S
with the ignition switch at ON position, DTCs will be
recorded.
Never use SRS parts from another vehicle. When re-
S
placing parts, replace them with new parts.
Never reuse the sensor involved in a collision when
S
the SRS has deployed.
Never repair a sensor in order to reuse it.
S
HINT:
For step 1 to 4, refer to page BO−11.
1. REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL
2. REMOVE OUTER MIRROR SWITCH ASSEMBLY
3. REMOVE FRONT DOOR LOWER FRAME BRACKET
GARNISH
4. REMOVE DOOR TRIM
5. REMOVE DOOR SIDE AIRBAG SENSOR
(a) Disconnect the door side airbag sensor connector.
NOTICE:
Disconnect the connector with sensor assembly installed.
(b) Remove the 2 bolts and door side airbag sensor.
H11994
2168
RS0KO−03