Toyota Celica 2005 Repair Manual page 1797

MX−24
2005 CELICA (RM1131U)
MANUAL TRANSAXLE (C60)
37.
D07342
38.
(a)
(b)
D07343
39.
40.
41.
NOTICE:
At the time of reassembly, please refer to the following
item.
Before reassembly, inspect the differential tapered roller
D07344
bearing preload. (See page MX−53)
42.
43.
(a)
NOTICE:
At the time of reassembly, please refer to the following
item.
Position the shifting key springs so that their end gaps are
not aligned.
(b)
D07345
− MANUAL TRANSAXLE ASSEMBLY
REMOVE NO. 1 GEAR SHIFT FORK FROM REVERSE
GEAR GROOVE
REMOVE NO. 3 GEAR SHIFT FORK SHAFT AND RE-
VERSE SHIFT FORK
Remove the No. 3 gear shift fork shaft from the reverse
shift fork and transaxle case.
Remove the reverse shift fork.
REMOVE NO. 2 GEAR SHIFT FORK FROM NO. 2 HUB
SLEEVE GROOVE
REMOVE INPUT AND OUTPUT SHAFTS TOGETHER
FROM TRANSAXLE CASE
REMOVE DIFFERENTIAL CASE ASSEMBLY
REMOVE MAGNET FROM TRANSAXLE CASE
DISASSEMBLE NO. 3 CLUTCH HUB ASSEMBLY
Using a screwdriver, remove the 2 shifting key springs.
Remove the 3 No. 3 shifting keys from the No. 3 clutch
hub.
1796