Toyota Celica 2005 Repair Manual page 2205

BE−30
Right turn
Left turn
3
I11598
I11599
3
2
1
2005 CELICA (RM1131U)
BODY ELECTRICAL
INSPECTION
1.
If continuity is not as specified, replace the switch.
2 1
I14297
2.
If continuity is not as specified, replace the switch.
I14192
3.
(a)
(b)
HINT:
S
S
BE1843
If operation is not as specified, replace the flasher.
− TURN SIGNAL AND HAZARD WARNING SYSTEM
INSPECT TURN SIGNAL SWITCH CONTINUITY
Switch position Tester connection
Left turn
Neutral
Right turn
INSPECT HAZARD WARNING SWITCH CONTINUITY
Condition Tester connection
OFF
ON
Illumination circuit
INSPECT TURN SIGNAL FLASHER OPERATION
Connect the battery positive (+) lead to terminal 2 and the
battery negative (−) lead to terminal 3.
Connect the 2 turn signal light bulbs parallel to each other
to terminals 1 and 3, then check that the bulbs flash.
The turn signal lights should flash 60 or 120 times per min-
ute.
If one of the front or rear turn signal lights has an open cir-
cuit, the number of flashers will be more than 140 per min-
ute.
2204
Specified condition
1 − 2 Continuity
− No continuity
2 − 3 Continuity
Specified condition
5 − 7 Continuity
5 − 6,
Continuity
1 − 2 − 4
8 − 9 Continuity
BE0OZ−11