Toyota Celica 2005 Repair Manual page 2122

SUPPLEMENTAL RESTRAINT SYSTEM
10 m (33 ft) or more
Y
Y
Weight
2005 CELICA (RM1131U)
−
(f) Install the SST.
CAUTION:
Place the disc wheel on the level ground.
SST
(1)
SST
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock. Also, se-
H03204
cure some slack for the SST wire harness inside the disc
wheel.
(2)
H03207
(g) Cover the steering wheel pad with a cardboard box or
tires.
S
X
Size of cardboard box:
Must exceed the following dimensions:
X = 460 mm (18.11 in.)
H03205
Y = 650 mm (25.59 in.)
NOTICE:
When dimension Y of the cardboard box exceeds the
S
diameter of the disc wheel with tire to which the steer-
ing wheel pad is tied, X should be the following size.
X = 460 mm (18.11 in.) + width of tire
If a cardboard box smaller than the specified size is
S
used, the cardboard box will be broken by the shock
from the airbag deployment.
2121
STEERING WHEEL PAD AND SPIRAL CABLE
Connect the connectors of the 2 SST to the steering
wheel pad connector.
09082−00700, 09082−00760
Move the SST to at least 10 m (33 ft) away from the
steering wheel pad tied down on the disc wheel.
Covering method using a cardboard box:
Cover the steering wheel pad with the cardboard
box and weight the cardboard box down in 4 places
with at least 190 N (20 kg, 44 lb).
RS−21