Toyota Celica 2005 Repair Manual page 1433

3 7 9
10
5
1
3 7 9
1 5 10
A01057
2005 CELICA (RM1131U)
ENGINE MECHANICAL
28.
(a)
6 2
(b)
(c)
8 4
NOTICE:
Head warpage or cracking could result from removing
bolts in an incorrect order.
6 2
(d)
8 4
A10369
(e)
HINT:
If the cylinder head is difficult to lift off, pry between the cylinder
head and cylinder block with a screwdriver.
NOTICE:
Be careful not to damage the contact surfaces of the cylin-
der head and cylinder block.
A01056
− CYLINDER HEAD
REMOVE CYLINDER HEAD
Disconnect the upper radiator hoses from the water hose
union.
Disconnect the heater water hose from the water hose
union.
Using a 10 mm bi−hexagon wrench, uniformly loosen and
remove the 10 cylinder head bolts, in several passes, in
the sequence shown. Remove the 10 cylinder head bolts
and plate washers.
Remove the bolt holding the water bypass pipe to the cyl-
inder head.
Lift the cylinder from the dowels on the cylinder block and
replace the cylinder head on wooden blocks on a bench.
1432
EM−47