Toyota Celica 2005 Repair Manual page 2369

Outside
Front
2005 CELICA (RM1131U)
BODY − QUARTER WINDOW GLASS
7. INSTALL NEW GLASS
(a) Install new glass to the body.
(b) Hold the glass in place securely with a protective tape or
equivalent until the adhesive hardens.
NOTICE:
Take care not to drive the vehicle during the time described
in the table below.
Temperature
35°C (95°F)
20°C (68°F)
5°C (41°F)
8. INSPECT FOR LEAK AND REPAIR
(a) Conduct a leak test after the hardening time has elapsed.
(b) Seal any leak with sealant.
Part No. 08833−00030 or equivalent.
9. INSTALL ROOF DRIP SIDE MOULDING
(See page BO−40)
10. INSTALL ROOF SIDE RAIL WEATHERSTRIP (See
page BO−40)
11. INSTALL ROOF SIDE INNER GARNISH
12. INSTALL FRONT SEAT OUTER BELT SHOULDER AN-
CHOR
Torque: 43 N·m (440 kgf·cm, 32 ft·lbf)
13. INSTALL QUARTER TRIM PANEL
14. INSTALL REAR SEAT OUTER BELT FLOOR ANCHOR
Install the rear seat outer belt floor anchor with the bolts as
shown in the illustration.
Torque: 43 N·m (440 kgf·cm, 32 ft·lbf)
15. INSTALL REAR SEATBACK LOCK STRIKER
Torque: 18 N·m (185 kgf·cm, 13 ft·lbf)
16. INSTALL REAR SEATBACK HINGE
Torque: 7.8 N·m (80 kgf·cm, 69 in.·lbf)
17. INSTALL DECK TRIM SIDE PANEL
H12601
18. INSTALL REAR DECK TRIM COVER
19. INSTALL LUGGAGE COMPARTMENT MAT
20. INSTALL PACKAGE TRAY TRIM
21. INSTALL REAR SEAT (See page BO−105)
22. INSTALL DOOR SCUFF PLATE
2368
Minimum time prior to driving the vehicle
1.5 hours
5 hours
24 hours
BO−63