Toyota Celica 2005 Repair Manual page 1836

Vehicle Speed Sensor
Driven Gear
2005 CELICA (RM1131U)
AUTOMATIC TRANSAXLE (U240E)
VEHICLE SPEED SENSOR
ON−VEHICLE REPAIR
1.
2.
3.
4.
5.
(a)
(b)
(c)
D05875
6.
(a)
(b)
(c)
O−ring
Clip
7.
8.
Q04678
9.
10.
− VEHICLE SPEED SENSOR
REMOVE BATTERY
REMOVE ECM AND ECM CASE
REMOVE ECM BRACKET
DISCONNECT VEHICLE SPEED SENSOR CONNEC-
TOR
REMOVE VEHICLE SPEED SENSOR ASSEMBLY
Remove the bolt and vehicle speed sensor assembly.
Remove the clip and speedometer driven gear from the
vehicle speed sensor.
Remove the O−ring from the vehicle speed sensor.
INSTALL VEHICLE SPEED SENSOR ASSEMBLY
Coat a new O−ring with ATF and install it to the vehicle
speed sensor.
Install the speedometer driven gear to the vehicle speed
sensor with clip.
Install the vehicle speed sensor assembly with the bolt.
Torque: 5.5 N·m (56 kgf·cm, 49 in.·lbf)
CONNECT VEHICLE SPEED SENSOR CONNECTOR
INSTALL ECM BRACKET
Torque:
Bolt: 18 N·m (185 kgf·cm, 13 ft·lbf)
Nut: 12 N·m (120 kgf·cm, 9 ft·lbf)
INSTALL ECM AND ECM CASE
Torque: 6.9 N·m (70 kgf·cm, 61 in.·lbf)
INSTALL BATTERY
1835
AX−3
AX08T−09