2005 CELICA (RM1131U)
AUTOMATIC TRANSAXLE (U341E)
ATF TEMPERATURE SENSOR
ON−VEHICLE REPAIR
1.
2.
D05906
3.
4.
NOTICE:
Some fluid will remain in the oil pan.
Remove the 19 bolts, and carefully remove the oil pan assem-
bly. Discard the gasket.
D05927
5.
(a)
(b)
D05898
6.
7.
(a)
(b)
8.
(a)
D05899
(b)
9.
−
ATF TEMPERATURE SENSOR
DISCONNECT SOLENOID CONNECTOR
REMOVE LH ENGINE UNDER COVER
REMOVE DRAIN PLUG AND DRAIN ATF
REMOVE OIL PAN AND GASKET
REMOVE OIL STRAINER
Remove the 3 bolts and oil strainer.
Remove the O−ring.
DISCONNECT 5 SHIFT SOLENOID VALVE CONNEC-
TORS
REMOVE ATF TEMPERATURE SENSOR
Remove the bolt and lock plate, and remove the ATF tem-
perature sensor.
Remove the O−ring from the ATF temperature sensor.
INSTALL ATF TEMPERATURE SENSOR
Coat a new O−ring with ATF and it to the direct clutch
speed sensor.
Install the ATF temperature sensor with the lock plate and
bolt.
Torque: 10 N·m (110 kgf·cm, 8 ft·lbf)
CONNECT 5 SHIFT SOLENOID VALVE CONNECTORS
1874
AX−5
AX0KW−02