Toyota Celica 2005 Repair Manual page 2255

BE−80
2005 CELICA (RM1131U)
BODY ELECTRICAL − WIRELESS DOOR LOCK CONTROL SYSTEM
2. REPLACE DOOR CONTROL RECEIVER AND TRANS-
MITTER
NOTICE:
When replacing the door control receiver and the transmit-
ter, registration of the recognition code is necessary be-
cause they are provided as a single components.
(a) Select which operation mode should be performed from
the following modes.
Add mode
S
Rewrite mode
S
Prohibition mode
S
Confirmation mode
S
HINT:
The add mode is used to retain codes already registered
S
while you register new recognition codes. This mode is
used when adding a transmitter. However, if the number
of registered codes exceeds 4 codes, previously regis-
tered codes are erased in order, starting from the first reg-
istered code.
The rewrite mode is used to erase all previously regis-
S
tered codes and register only new recognition codes.
The prohibition mode is used to erase all registered codes
S
and cancels the wireless door lock function. Use this
mode when the transmitter is lost.
The confirmation mode is for confirming how many recog-
S
nition codes are already registered before you register
additional recognition codes.
(b) Follow the chart on the following pages to register the
transmitter recognition code at the wireless door lock con-
trol receiver.
HINT:
When procedure is out of the specified, the operation re-
S
turns to normal operation.
Maximum of 4 recognition codes can be registered.
S
2254