Toyota Celica 2005 Repair Manual page 1747

SST
2005 CELICA (RM1131U)
MANUAL TRANSAXLE (C56)
(b)
5.
Using 2 screwdrivers and a hammer, tap out the snap ring.
HINT:
Take care not to damage the journal surface of the input shaft.
6.
(a)
HINT:
Support the input shaft by hand so that it will not be dropped off.
CM0064
(b)
7.
(a)
(b)
Q00817
− INPUT SHAFT
Remove the needle roller bearings, spacer and No. 2 syn-
chronizer ring (for the 4th gear).
REMOVE SNAP RING
REMOVE NO. 2 HUB SLEEVE ASSEMBLY, 3RD GEAR,
NO. 2 SYNCHRONIZER RING (FOR 3RD GEAR) AND
NEEDLE ROLLER BEARING
Using SST and a press, remove the No. 2 hub sleeve as-
sembly, 3rd gear and No. 2 synchronizer ring (for the 3rd
gear).
SST 09950−00020
Remove the needle roller bearings.
DISASSEMBLE NO. 2 HUB SLEEVE ASSEMBLY
Remove the No. 2 hub sleeve from the No. 2 clutch hub.
Remove the 3 No. 2 shifting keys and No. 2 shifting key
springs from the No. 2 clutch hub.
1746
MX−29