Toyota Celica 2005 Repair Manual page 1750

MX−32
For 3rd Gear
2005 CELICA (RM1131U)
MANUAL TRANSAXLE (C56)
REASSEMBLY
HINT:
Coat all of the sliding and rotating surfaces with gear oil before
reassembly.
1.
(a)
Press
(b)
NOTICE:
D00333
Assemble the No. 2 hub sleeve and No. 2 clutch hub in the
direction shown in the illustration.
2.
(a)
(b)
NOTICE:
Distinguish the No. 2 synchronizer ring (for the 3rd gear) by
the teeth on the synchronizer ring.
D07722
(c)
NOTICE:
Be sure to install the No. 2 hub sleeve assembly in the cor-
rect direction, as shown in the illustration.
(d)
N00067
− INPUT SHAFT
ASSEMBLE NO. 2 HUB SLEEVE ASSEMBLY
Install the 3 No. 2 shifting key springs and No. 2 shifting
keys to the No. 2 clutch hub.
Install the No. 2 hub sleeve to the No. 2 clutch hub.
INSTALL NEEDLE ROLLER BEARING, 3RD GEAR,
NO. 2 SYNCHRONIZER RING (FOR 3RD GEAR) AND
NO. 2 HUB SLEEVE ASSEMBLY TO INPUT SHAFT
Apply gear oil to the needle roller bearings and install it.
Install the 3rd gear and No. 2 synchronizer ring (for the 3rd
gear).
Install the No. 2 hub sleeve assembly so that the No. 2
synchronizer ring slots and No. 2 shifting keys are
aligned.
Using a press, install the No. 2 hub sleeve assembly.
1749
MX09N−11