Toyota Celica 2005 Repair Manual page 2366

BO−60
Adhesive
Spacer
Primer M
Primer M
Adhesive
2005 CELICA (RM1131U)
BO4420
BO4421
Spacer
H12603
H02865
BODY − QUARTER WINDOW GLASS
INSTALLATION
1. CLEAN AND SHAPE CONTACT SURFACE OF BODY
PANEL
(a) Using a knife, cut away any rough areas on the body.
HINT:
Leave the adhesive on the body as much as possible.
(b) Clean the cut surface of the adhesive with a shop rag sat-
urated in cleaner.
HINT:
Even if all the adhesive has been removed, clean the body.
2. CLEAN CONTACT SURFACE OF NEW GLASS
Using a cleaner, clean the contact surface which is black−col-
ored area around the entire glass rim.
NOTICE:
Do not touch the glass face after cleaning it.
3. INSTALL NEW SPACERS
Install the new spacers to the quarter window glass as shown
in the illustration.
4. COAT CONTACT SURFACE OF BODY WITH PRIMER
"M"
Using a brush, coat Primer M to the exposed part of body on the
vehicle side.
NOTICE:
Allow 3 minutes or more to dry the primer coated sur-
S
face.
Do not coat Primer M to the adhesive.
S
Do not keep any of the opened Primer M for later use.
S
2365
BO2NV−02