Toyota Celica 2005 Repair Manual page 2302

CLOCK
TROUBLESHOOTING
HINT:
Troubleshoot the clock according to the table below.
Passenger seat belt warning light does not come on.
Clock does not operate.
Clock loses or gains time (± 1.5 seconds/day)
1. INSPECT CLOCK CIRCUIT
2. TROUBLESHOOTING NO.1
PASSENGER SEAT BELT WARNING LIGHT DOES NOT OPERATE
1
CLOCK DOES NOT OPERATE
US:
Clock Assembly
4
ACC
5
+B
2
PBEW
3
ILL
1
E
Wire Harness Side
CANADA:
5
ACC
1
B
8
PSW
6
ILL
12
E
Wire Harness Side
2005 CELICA (RM1131U)
BODY ELECTRICAL
Troubleshooting
ECU−ACC Fuse
DOME Fuse
Combination
Meter
PANEL 1 Fuse
Ground
ECU−ACC Fuse
DOME Fuse
Combination
Meter
PANEL 1 Fuse
Ground
I25303
− CLOCK
(a) Turn ignition switch ON.
(b) Check that the battery positive voltage is 10 − 16 V.
If voltage is not as specified, replace the battery.
(c) Check that the DOME and ECU−ACC fuses are not
blown.
If the fuse is blown, replace the fuse and check for short.
(d) Troubleshoot the clock as follows.
HINT:
Inspect the connector on the wire harness side.
2301
BE−127
BE0G0−15
No.
1
1
2