Toyota Celica 2005 Repair Manual page 1713

SST
2005 CELICA (RM1131U)
CLUTCH − CLUTCH RELEASE CYLINDER
INSTALLATION
1. INSTALL RELEASE CYLINDER
(a) Install the release cylinder and clutch line bracket with the
2 bolts.
Torque: 12 N·m (120 kgf·cm, 9 ft·lbf)
(b) Install the clutch line clamp to the clutch line bracket with
the bolt.
Torque: 4.9 N·m (50 kgf·cm, 43 in.·lbf)
(c) Install the air cleaner case assembly with the air hose.
D07713
2. CONNECT CLUTCH LINE AND BLEED CLUTCH SYS-
TEM
(a) Raise the vehicle.
CAUTION:
Make sure that the vehicle is securely supported.
(b) Using SST, connect the clutch line.
SST 09023−00101
Torque: 15 N·m (155 kgf·cm, 11 ft·lbf)
(c) Fill the brake reservoir tank with brake fluid and bleed
D07703
clutch system.
(d) Check for the leaks.
(e) Install the LH and RH engine under covers.
(f) Lower the vehicle.
1712
CL−13
CL09I−07