Toyota Celica 2005 Repair Manual page 1449

For Radiator Hose (A)
15 mm
For Heater Hose (B)
20 mm
For Water Bypass Hose (C)
1ZZ−FE:
Adhesive
2ZZ−GE:
Adhesive
A01439
2005 CELICA (RM1131U)
ENGINE MECHANICAL
REASSEMBLY
HINT:
S
S
S
1.
HINT:
When using a new cylinder head, water hose unions must be
installed.
(a)
9 mm
A01438
(b)
A10418
− CYLINDER HEAD
Thoroughly clean all parts to be assembled.
Before installing the parts, apply fresh engine oil to all slid-
ing and rotating surfaces.
Replace oil seals with new ones.
INSTALL WATER HOSE UNIONS
Mark the standard position away from the edge, onto the
water hose union.
Apply adhesive to the water hose union hole of the cylin-
der head.
Adhesive:
Part No.08833−00070, THREE BOND 1324 or equiva-
lent
1448
EM−63
EM15X−02