Toyota Celica 2005 Repair Manual page 1586

No Continuity
F
E
F
E
2005 CELICA (RM1131U)
Ohmmeter
Continuity
B08661
Ohmmeter
B08662
Air
B08663
Air
Battery
B08664
SFI − VSV FOR PRESSURE SWITCHING VALVE
INSPECTION
1. REMOVE VSV
2. INSPECT VSV FOR OPEN CIRCUIT
Using an ohmmeter, check that there is continuity between the
terminals.
Resistance:
At 20°C (68°F)
At 120°C (248°F)
If there is no continuity, replace the VSV.
3. INSPECT VSV FOR GROUND
Using an ohmmeter, check that there is no continuity between
each terminal and the body.
If there is no continuity, replace the VSV.
4. INSPECT VSV OPERATION
(a) Check that air does not flow from ports E to F.
(b) Apply battery positive voltage across the terminals.
(c) Check that air flows from ports E to F.
If operation is not as specified, replace the VSV.
5. REINSTALL VSV
1585
SF−65
SF161−09
37 − 44 Ω
51 − 62 Ω