Toyota Celica 2005 Repair Manual page 1545

SF−24
New Grommet
Turn
Connector
Rotate
Outward
2005 CELICA (RM1131U)
New O−Ring
B00201
Push
B00202
Spacer
B09175
B09174
B00071
SFI − INJECTOR
INSTALLATION
1. INSTALL INJECTORS AND DELIVERY PIPES
(a) Install the grommet to each injector.
(b) Apply a light coat of spindle oil or gasoline to new O−ring
and install them to each injector.
(c) Apply a light coat of spindle oil or gasoline on the place
where a delivery pipe touches on O−ring.
(d) While turning the injector clockwise and counterclock-
wise, push it to the delivery pipes. Install the 4 injectors.
(e) Position the injector connector outward.
(f) Place the 2 spacers in position on the cylinder head.
(g) Apply a light coat of spindle oil or gasoline on the place
where a cylinder head touches an O−ring of the injector.
(h) Place the delivery pipe and fuel pipe together with the 4
injectors in position on the cylinder head.
(i) Temporarily install the 2 bolts holding the delivery pipe to
the cylinder head.
(j) Temporarily install the bolt holding the fuel pipe to the cyl-
inder head.
(k) Check that the injectors rotate smoothly.
HINT:
If injectors do not rotate smoothly, the probable cause is incor-
rect installation of O−ring. Replace the O−ring.
(l) Position the injector connector outward.
1544
SF09L−12