Toyota Celica 2005 Repair Manual page 1917

SA−10
Example:
Camber
Toe−in
(RH)
2005 CELICA (RM1131U)
SUSPENSION AND AXLE
(LH)
F08661
− (Outward) + (Inward)
+ (Inward)
− REAR WHEEL ALIGNMENT
6. HOW TO READ ADJUSTMENT CHART (EXAMPLE)
(a) Measure the present alignment.
Example:
Camber (RH): −0°26' (−0.43°)
Camber (LH): −1°56' (−1.93°)
Toe−in (total): IN 7 mm (0.28 in.)
(b) Mark the difference between the standard value (A) and
the measured value (B) on the adjustment chart.
Standard value:
Camber: −1°11' (−1.18°)
Toe−in (total): IN 3mm (0.12 in.)
Formula: A − B = C
Camber (RH): −1°11' − (−0°26') = −0°45'
Camber (LH): −1°11' − (−1°56') = 0°45'
Toe−in (total): IN3 − IN7 = OUT 4
Toe−in (each side): OUT 2
(c) As shown in the example chart, read the distance from the
marked point to the origin of the chart, and adjust the up-
per and/or lower arm adjusting cams accordingly
Amount to turn adjusting cams (by graduation):
Upper arm cam (RH): + (Inward) 3.2
Lower arm cam (RH): + (Inward) 0.8
Upper arm cam (LH): − (Outward) 2.3
Lower arm cam (LH): + (Inward) 1.0
− (Outward) + (Inward)
− (Outward) + (Inward)
1916
− (Outward)
F08654