Toyota Celica 2005 Repair Manual page 2400

BO−94
Wire Harness Protector
2005 CELICA (RM1131U)
BODY − FRONT SEAT
DISASSEMBLY
1. w/ Vertical adjuster:
REMOVE VERTICAL ADJUSTER KNOB
Using a screwdriver, remove the clip and vertical adjuster knob.
HINT:
Tape the screwdriver tip before use.
2. REMOVE RECLINING ADJUSTER RELEASE HANDLE
3. REMOVE FRONT SEAT CUSHION SHIELD
Remove the front seat cushion shield as shown in the illustra-
tion.
H12634
4. REMOVE FRONT SEAT CUSHION INNER SHIELD
Remove the screw and front seat cushion inner shield as shown
in the illustration.
5. REMOVE SEATBACK ASSEMBLY
(a) Remove the hog rings.
(b) Zip the seatback cover open.
H12635
(c) w/ Side airbag assembly:
Turn over the wire harness protector as shown in the il-
lustration.
(d) w/ Side airbag assembly:
Disengage the side airbag wire harness from the seat
cushion frame.
(e) w/ Side airbag assembly:
Pull out the side airbag wire harness from the slit of seat-
back cover.
H12636
(f) Remove the 4 bolts and seatback assembly.
6. REMOVE SEATBACK COVER
(a) w/ Side airbag assembly:
Disengage the clamp of side airbag wire harness, then re-
move the 2 nuts.
H12637
2399
BO2OC−02