Toyota Celica 2005 Repair Manual page 1543

SF−22
SST
(Hose)
SST
(Union)
(Clamp)
Fuel Pipe
Injector
(On vehicle)
Fuel Tube Connector
SST
(Hose)
Fuel Pipe
SST (Union)
O−Ring
Vinyl Tube
TOYOTA Hand−Held Tester
DLC3
2005 CELICA (RM1131U)
Fuel
Tube
Connector
SST
B00066
S05359
Fuel Tube
Connector
B00067
SST (Hose)
SST
(Clamp)
B00068
D07259
SFI − INJECTOR
INSPECTION
1. INSPECT INJECTOR INSPECTION
CAUTION:
Keep injector clear of sparks during the test.
(a) Purchase the new fuel tube and take out the fuel tube
connector from its pipe.
Part No. 23901−22010
(b) Connect SST (hose) and fuel tube connector to the fuel
pipe.
SST 09268−41047
CAUTION:
Perform connecting operations of the fuel tube connector
(quick type) after observing the precautions.
(c) Install the grommet and O−ring to the injector.
(d) Connect SST (union and hose) to the injector, and hold
the injector to prevent gasoline from splashing out.
SST 09268−41047
(e) Put the injector into a graduated cylinder.
HINT:
Install a suitable vinyl tube onto the injector to prevent gasoline
from splashing out.
(f) Connect the TOYOTA hand−held tester to the DLC3.
(g) Turn the ignition switch ON and TOYOTA hand−held tes-
ter main switch ON.
NOTICE:
Do not start the engine.
(h) Select the active test mode on the TOYOTA hand−held
tester.
(i) Please refer to the TOYOTA hand−held tester operator's
manual for further details.
1542
SF09K−17