Toyota Celica 2005 Repair Manual page 1733

2005 CELICA (RM1131U)
MANUAL TRANSAXLE (C56)
9.
(a)
(b)
D07401
10.
NOTICE:
At the time of reassembly, please refer to the following
item.
Set the claws of the shift interlock plate into the shift head
part of the gear shift fork shaft securely.
11.
(a)
(b)
(c)
(d)
Q05783
12.
(a)
(b)
D04366
HINT:
At the time of reassembly, please refer to the following items.
S
− MANUAL TRANSAXLE ASSEMBLY
REMOVE LOCK BALL ASSEMBLY AND CONTROL
SHAFT COVER
Remove the lock ball assembly.
Sealant:
Part No. 08833−00080, THREE BOND 1344, LOCTITE
242 or equivalent
Torque: 29 N·m (300 kgf·cm, 22 ft·lbf)
Remove the 4 bolts and control shaft cover with the gas-
ket.
Sealant:
Part No. 08833−00080, THREE BOND 1344, LOCTITE
242 or equivalent
Torque: 20 N·m (200 kgf·cm, 14 ft·lbf)
REMOVE SHIFT AND SELECT LEVER SHAFT AS-
SEMBLY
REMOVE LOCK NUT
Engage the gear double meshing.
Using a chisel and hammer, loosen the staked part of the
nut.
Remove the lock nut.
Torque: 118 N·m (1,200 kgf·cm, 87 ft·lbf)
Disengage the gear double meshing.
REMOVE NO. 3 HUB SLEEVE AND NO. 3 GEAR SHIFT
FORK
Remove the bolt from the No. 3 gear shift fork.
Torque: 16 N·m (160 kgf·cm, 12 ft·lbf)
Sealant:
Part No. 08833−00080, THREE BOND 1344, LOCTITE
242 or equivalent
Remove the No. 3 hub sleeve with the No. 3 gear shift
fork.
Install the No. 3 clutch hub assembly to the No. 3 hub
sleeve.
1732
MX−15