Toyota Celica 2005 Repair Manual page 2063

2005 CELICA (RM1131U)
STEERING − TILT STEERING COLUMN
(c) Remove the adjusting nut, tilt lever, stopper, tilt lever lock
bolt and break away bracket.
HINT:
This nut is left−handed one.
(d) Remove the No. 2 support collar from the break away
bracket.
F08876
5. REMOVE MAIN SHAFT BUSHING
Using a screwdriver and hammer, tap out the main shaft bush-
ing.
6. REMOVE MAIN SHAFT ASSEMBLY
(a) Using a snap ring expander, remove the snap ring on the
upper side.
(b) Remove the main shaft assembly.
(c) Using a snap ring expander, remove the snap ring on the
lower side.
F08880
2062
SR−17