Toyota Celica 2005 Repair Manual page 2010

2005 CELICA (RM1131U)
BRAKE − FRONT BRAKE CALIPER
REMOVAL
1. REMOVE FRONT WHEEL
Remove the wheel and temporarily fasten the disc with hub
nuts.
Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)
2. DISCONNECT FLEXIBLE HOSE
(a) Remove the union bolt and gasket from the caliper, then
disconnect the flexible hose from the caliper.
Torque: 30 N·m (310 kgf·cm, 22 ft·lbf)
HINT:
At the time of installation, install the flexible hose lock securely
in the lock hole in the caliper.
(b) Use a container to catch the brake fluid as it drains out.
3. REMOVE CALIPER
F09539
(a) Hold the sliding pin and remove the 2 installation bolts.
Torque: 34 N·m (350 kgf·cm, 25 ft·lbf)
(b) Remove the caliper from the torque plate.
4. REMOVE 2 PADS WITH ANTI−SQUEAL SHIMS
5. REMOVE 2 PAD SUPPORT PLATES
2009
BR−23
BR0QE−08