Toyota Celica 2005 Repair Manual page 2355

Plastic Sheet
2005 CELICA (RM1131U)
BODY
12.
(a)
NOTICE:
Do not damage the body with the knife.
(b)
H10406
13.
(a)
(b)
(c)
NOTICE:
Be careful not to damage the wire harness.
BO5232
(d)
NOTICE:
When separating the glass, take care not to damage the
paint and exterior ornaments. To prevent the safety pad
from being scratched when removing the windshield,
place a plastic sheet between the piano wire and safety
pad.
HINT:
Protective Tape
Apply protective tape to the outer surface to keep the surface
BO1689
from being scratched.
(e)
NOTICE:
Leave the adhesive on the body as much as possible when
cutting off the glass.
− WINDSHIELD
REMOVE WINDSHIELD OUTSIDE MOULDING
Using a knife, cut off the moulding as shown in the illustra-
tion.
Remove the remaining moulding.
REMOVE WINDSHIELD GLASS
Insert a piano wire between body and glass and let it pass
through.
Tie both wire ends to wooden blocks or similar objects.
w/ Front window defogger:
Disconnect the connector.
Cut the adhesive by pulling the piano wire around it.
Remove the glass.
2354
BO−49