Toyota Celica 2005 Repair Manual page 1534

2005 CELICA (RM1131U)
SFI
REASSEMBLY
1. INSTALL FUEL SUCTION FILTER
Install the suction filter with a new clip.
B11020
2. INSTALL FUEL PUMP
Connect the fuel pump to the fuel filter.
3. INSTALL FUEL PRESSURE REGULATOR
(a) Install the O−ring to the pressure regulator.
HINT:
Apply a light coat of gasoline to a new O−ring, and install it to
the pressure regulator.
(b) Connect the pressure regulator to the fuel filter.
4. INSTALL NO. 1 FUEL SUCTION SUPPORT
B07752
(a) Connect the fuel pump harness to the No. 1 fuel suction
support and fuel pump.
(b) Install the No. 1 fuel suction support to the fuel filter.
(c) Install the fuel sender gauge to the fuel pump filter so that
the distance between the No.1 fuel suction support and
the float fulcrum of the fuel sender gauge is 150 mm (5.91
in.).
150 mm
(5.91 in.) (d) Connect the fuel sender gauge connector and earth
plate.
5. INSTALL NO. 2 FUEL SUCTION SUPPORT
(a) Install the rubber cushion.
(b) Install the No. 2 fuel suction support to the No. 1 fuel suc-
B11525
tion support.
6. INSTALL VAPOR PRESSURE SENSOR
Install the vapor pressure sensor and connect the joint clip to
the No. 1 fuel suction support.
− FUEL PUMP
1533
SF−13
SF13Q−09