Toyota Celica 2005 Repair Manual page 1868

2005 CELICA (RM1131U)
AUTOMATIC TRANSAXLE (U240E)
INSTALLATION
1.
Using calipers and a straight edge, measure the distance be-
tween the installed surface and the front surface of the trans-
axle housing.
2.
Installation is in the reverse order of removal (See page
AT3412
AX−31).
HINT:
S
S
S
S
− AUTOMATIC TRANSAXLE UNIT
CHECK TORQUE CONVERTER CLUTCH INSTALLA-
TION
Correct distance: More than 13.3 mm (0.524 in.)
TRANSAXLE INSTALLATION
After installation, adjust the shift control cable and park/
neutral position switch (See page DI−669).
Fill ATF and check the fluid level (See page DI−669).
Perform the test drive of the vehicle.
Adjust the hood (See page BO−9).
1867
AX−35
AX0KQ−05